Audioscan Verifit 2 Manuel d'utilisateur télécharger pdf (Page 65)

Verifit

User's Guide Version 4.2 © June 2015

Tele-test fitting and verification in Speechmap

WARNING: The included magnet may effect some medical or electronic devices. Keep magnet at least 5cm

(2in.) from implantable devices and other magnetically sensitive devices.

WARNING: Keep magnet out of reach of children and pets. If a magnet is swallowed seek immediate medical

attention.

This test allows the telecoil response of the hearing instrument to be measured so that it can be compared against

a 65 dB SPL acoustic response. In addition, auto-coil, binaural coordination and binaural streaming features can

be verified. The tele-test handset comes with a small magnet attached that may affect implantable devices. See

How to Avoid Undesirable Side Effects.

1. Set the instrument to 'T' (Telecoil input) or enable the auto-coil feature.

2. Click in any of the test areas to start a test and select one of the calibrated speech stimuli.

3. Change the level to Tele-test (65). This will result in an inductive signal from the Tele-test handset

equivalent to 65 dB SPL acoustic stimulus when positioned close to the hearing instrument.

4. If using an auto-coil feature, attach the switching magnet provided with the hearing instrument (or an

Audioscan switching magnet) to the Tele-test handset in the marked position appropriate for the hearing

instrument.

5. Position the Tele-test handset within 1 cm of the hearing instrument such that the front face of the Tele-test

handset is parallel to the height of the hearing instrument (e.g. like holding a telephone handset or

cellphone).

6. Activity on the graph indicates that the hearing instrument is receiving the inductive stimulus.

7. Click to measure and store the long-term averaged result. The result can be directly compared against a

65 dB acoustic response.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 155 156

Pas de commentaire

Audioscan Verifit 2 Manuel d'utilisateur Page 65